This browser does not support the video element.
Automatic Kitchen Towel Paper Roll Rewinding Machine
CBM-SP-2600A
Video link:
Description of product:
1. PLC (computer) control production, degree of full-automatic of production process is high,
the function of machine is complete , production efficiency is high.
2. Load and change the core , spray glue, seal can be done without stop the machine.
When changing the core, the machine will low the speed and up the speed automatically.
3. When change the core to rewind, it will be tight first and then loose,
to avoid the core loose.
4. Equipped with automatic alarm to indicate filling up of core pipe.
The machine will be automatically stopped when there is no core pipes.
5. When raw material broken, the machine will stop automatically.
6. Each raw material unreel separately, equip with tension control.
7. Easy to adjust to suitable different paper core.
8. There is tail after the finished product sealed with glue , easy to use.
9. There is pneumatic jack to load the raw material on machine
10. Adopt two sets embossing roller to produce “ dot-to-dot” embossment on the paper.
11. As required, the machine equips with the stable ,heavy ,strong holding steel frame to
produce the dot-to-dot colored products.
Features:
1. Production Procedure is controlled by Programmable controller
system, fully automatic in production process, the function is complete and the production speed is high.
2. It can automatically exchange the core, spraying, and sealing without stopping the machine and also automatically raise and lower speed when exchanging the core.
3. When exchange the core, the machine will be tight first and loosen later to avoid dropping off the roll core.
4. Equipped with automatic alarm to indicate filling up of core pipe. The machine will be automatically stopped when there is no core pipes.
5. Automatic alarm for breaking off of paper.
6. Equipped separate tension control for each unwinding jumbo roll.
7. It is convenient to change the feature to produce any other core pipe winding.
8. Left paper remind after sealing of product for convenient use.
9. Jumbo roll stand is installed by pneumatic.
10. The newest embossing units are to produce high quality products.
Technical data:
1. Production speed:100-240m/min
2. Product specification:￠90-￠130mm(can be adjustable)
3. Punching line distance:90-120mm,180-240mm(can be adjustable)
4. Power:21.5Kw (380V 50Hz)
5. Overall size（LxWxHm):
7.5x3.1x1.9 (with two embossing units, two laying paper stands type)
6.Raw jumbo roll:
2.6 m in width ,20-25gsm/layer,1500mm in diameter
7.Weight:About 7.8 M/T